ورود
مقالات فارسیISIکنفرانسهاژورنالها

انتشار مقالات یازدهمین سمینار پیل سوختی ایران

شنبه، 18 تیر، 1401
انتشار مقالات یازدهمین سمینار پیل سوختی ایران
مقالات یازدهمین سمینار پیل سوختی ایران در تاریخ 18 تیر 1401 در پایگاه سیویلیکا نمایه و منتشر شد.این رویداد توسط دانشگاه صنعتی مالک اشتر و انجمن الکتروشیمی ایران و دانشگاه تخصصی فناوری های نوین آمل در شهر فریدونکنار برگزار شده است.در این رویداد 52 مقاله شامل 104 صفحه ارائه شده است.بر اساس تحلیل اولیه انجام شده، مقالات این دوره از کنفرانس عمدتا در موضوعات زیر ارائه شده است:
  • - انرژی (عمومی)
  • - شیمی (عمومی)
لیست و عناوین مقالات نمایه شده از یازدهمین سمینار پیل سوختی ایران به صورت زیر می باشد:

1. Direct ethanol fuel cells with higher ethanol-tolerant nonprecious metal cathode catalysts for oxygen reduction reaction


2. Plasma-nitrided ۳۱۶L stainless steel as a bipolar plate in polymer fuel cells


3. Fuzzy-based modelling technique for PEMFC electrical power generation systems emulation


4. Effect of Ketone and Sulfone Functional Group Contents on Water Absorption and Oxidative Stability of Poly(Ether Sulfone Ketone) Proton Exchange Membranes


5. Experimental and Numerical Analysis of Failure Behavior of Graphite Based Composite Bipolar Plate of PEM Fuel Cell


6. Polymer composites bipolar plates for fuel cell


7. Enhancing oxygen reduction reaction of microbial fuel cells with binary nanohybrid


8. Design, Manufacturing and Testing of Primary Separators to Removal of Condensed Water at the Inlet of PEMFC


9. Synthesis of AuNi-N doped of Graphene quantum dots as efficient electrocatalyst in formate-hydrogen peroxide fuel cell


10. Application of Binder free Anode Electrode in Direct Ethanol Fuel Cell


11. Investigation of lubricant effect on directional thickness distribution of U-shaped micro channels of bipolar plates


12. Determining the formulation and fabrication of high rigidity composite plates for use in the end plates of PEM fuel cells


13. Preparation of chemical resistance two-component epoxy-based adhesive used in epoxygraphite composite of fuel cells


14. Parametric Analysis of Methanol Steam Reforming Reactor for Hydrogen Production


15. Manufacturing of composite bipolar plates for PEM fuel cell applications


16. Development of metallic bipolar plate contact resistance using TiN coating


17. Experimental study of contact pressure distribution for PEM fuel cell with metallic bipolar plates


18. Analytical and Experimental Analysis of Bending PEMFC Laminate Composite End Plates


19. Effect of curing agent on mechanical and chemical properties of EPDM in an acidic environment


20. Experimental investigation of voltage variation of purge cells at dead-end mode in a ۲kw cascade-type PEM fuel cell stack


21. Evaluation of Single Cell Aluminum-Water Fuel Cell Performance


22. Development of Ni-Mo Cathode Electrode in Al-Water Fuel Cell: Electrodeposition Technique


23. Fuel Cell Based Renewable Energy System for Off-grid Applications: Conceptual Design


24. A methodology for sizing and flight time estimation of a PEM fuel cell powered Multi-rotor UAV


25. Measurement of Electrochemical Active Surface Area (ECAS) of Single Cell PEMFC Using Test Procedure of European Union Hydrogen and Fuel Cell Joint Undertaking: Test Module P-۱۰d


26. Theoretical Analysis of Formability in Forming Process of Metallic Bipolar Plates by Using Stamping Process


27. Electromechanical numerical simulation of contact resistance between BPP and GDL in a PEM fuel cell with TLM method


28. Experimental analysis of formability of stainless steel ۳۱۶L metallic bipolar plates


29. Ethanol oxidation on Pt/CNF-GNPs/GDL electrode for fuel cell application


30. Sliding Mode Control for PEM Fuel Cells


31. Numerical analysis of the effect of thickness of cell foil on the flexural behavior of honeycomb sandwich panels for use in PEM fuel cell end plates


32. Fault Detection Based on Super-Twisting Sliding Mode for PEM Fuel Cells


33. Comparison of the Measured Hydrogen Crossover of Single Cell PEMFC by Cyclic voltammetry, linear sweep voltammetry and chronoamperometry


34. Development of water cooling system for a ۲ KW PEM fuel cell stack


35. Experimental Evaluation of PEMFC Water Separators Level Control System Based on Air Bubble Detection Sensor


36. Power System Design and Implementation Based on Parallel DC-DC Converters: A Case Study for Fuel Cell Application


37. Modeling and simulation of dynamic characteristics, a membrane fuel cell for proton exchange


38. Three-point bending of sandwich panel with grid core and different types of materials including C/SiC and E-glass epoxy in end plate of full cell


39. Finite element study of different parameter effects on the gas diffusion layer compression


40. Phase Formation Investigation In Mechanochemical Synthesis Of Nanostructured Strontium-Doped Lanthanum Manganite


41. Simulation, Optimization andTechno-Economic Evaluation of a Photovoltaic HydrogenFuel Cell Hybrid Power System


42. Fuel Cell/Battery Hybrid System Structures for Unmanned Air Vehicle Applications


43. Synthesize ZnFe۲O۴-ZrO۲ as substrate for Pt in Direct methanol fuel cells


44. Preparation of graphene oxide/molybdenum disulfide nanocomposite as a platinum-nickel electrocatalyst substrate


45. Solid Oxide Fuel Cell for Use in the Hydrogen Liquefaction Cycle


46. Solid hydrogen carriers and solid oxide fuel cells application in maritime industry


47. Numerical analysis of flow maldistribution in planar solid oxide fuel cells with U, Z, and I arrangements


48. Simulation of portable low power direct glucose fuel cell for medical implant using a COMSOL


49. Potential use of short fibers in Nafion membrane for fuel cell applications


50. Preparation and Properties of Polyhedral Oligomeric Silsesquioxane (POSS)/ Blend Sulfonated Poly (Phenyl Sulfone) Membrane for PEM Fuel Cell Application


51. PV-Fuel Cell vs. PV- Diesel Generator Hybrid Power System: A Comparative Study


52. Vanadium carbide to boost Palladium as anodic catalyst for direct ethanol fuel cell


اخبار مرتبط با کنفرانسها