A Head Injury Modeling Via Impact Response of a Fluid-filled Hollow Sphere Subject To External Impulsive Force

سال انتشار: 1389
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,947

فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

ISME18_598

تاریخ نمایه سازی: 1 تیر 1389

چکیده مقاله:

An analytical solution, based on exact linear elasticity,is obtained for the time-domain response of a fluidfilled spherical shell and its coupled internal fluid field due to an impulsive impact load on the outer surface of shell. This solution used to model the head injury of human in which the motion of the fluid is assumed to be governed by the wave equation. First, the axi-symmetric stress acting on the outer surface of the shell isexpanded into modal Fourier-Legendre components in which for each modal stress systematic exact expressions for modal displacement of the shell, fluid pressure, particle velocity and displacement can be derived. Afterward, The Laplace transform with respect to the time coordinate is invoked, and the classical method of separation of variables is used to obtain the transformed solutions in the form of partial-wave expansions in terms of Legendre polynomials. Finally, the inversion of Laplace transforms have been carried out numerically using Durbin's approach based onFourier series expansion. Subsequently, the solutions thus obtained for the fluid and solid medium are the Green's functions of the problem with respect to time in case of Dirac’s delta function as the impact model. Meanwhile, general time-domain approach is used to present problem from fluid-loaded elastic shells which is based on utilizing an in-vacuo eigenvector expansion with time-dependent coefficients for the velocity field of the shell where the time-dependent modal velocity coefficients of the shell are described by a set of coupled convolution integral equations. As a result, it has been found that this method has acceptable match with exact elasticity method in wall/outer radius ratio less than 0.1 and so this method is not applicable to the higher ratios. From the application point of view, such a fluid-shell system based on exact linear elasticity theoryis considered to be a simple and from computational point of view faster in comparison with FEM, BEM or other numerical methods. Some numerical results for the theoretical model are obtained for a set of appropriate data. In order to get proper results, the Rigid Body motion has been eliminated from the final modal solution. The comparison is made for the stress distributions at various times in the shell for both the empty and the fluid-filled cases. In addition, in the fluid-filled case the excess pressure propagation in the fluid is also discussed. Finally, the effect of external fluid in the case of head injury in the water has been encountered in such cases.

نویسندگان

Ako Bahari

National Iranian Gas Company/Iran University of Science and Technology

Asghar Nasr

University of Science and Technology

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :