Cathodic Electrodeposition and Characterization of YAG Nanostructure: Effect Current Density on the Morphology
محل انتشار: مجله سرامیک های پیشرفته، دوره: 4، شماره: 2
سال انتشار: 1397
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 488
فایل این مقاله در 5 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_ACERPT-4-2_005
تاریخ نمایه سازی: 23 مهر 1398
چکیده مقاله:
Abstract YAG (Yttrium Aluminum Garnet) was successfully prepared through cathodic electrodeposition process using applying different current densities to the mixture of YCl3 and AlCl3 dissolved in water/ethanol 1:1 solution. Hydroxide precursors were cathodically grown on the cathode surface (at different current densities) and then the obtained hydroxide powder was heat-treated at 1100 °C for 4 h. The oxide products were characterized by XRD, FTIR, DSC-TGA, SEM and EDAX techniques. The effect of applied current density on the morphology and particle size of YAG nanostructures were investigated through SEM images. Results showed that the cathodic electrodeposition followed by heat-treatment can be used as a facile method for preparation of YAG nanostructures with different morphologies.
کلیدواژه ها:
نویسندگان
Mojtaba Hosseinifard
materials and energy research center
Kamran Ahmadi
Department of Semiconductors, Materials and Energy Research Center (MERC)
Alireza Badiei
Chemistry, University of Tehran