Hydraulic analysis of compound open channel

سال انتشار: 1394
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 357

فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_ARWW-2-1_007

تاریخ نمایه سازی: 24 شهریور 1398

چکیده مقاله:

Distribution of velocity of flow in compound open channel due to interaction of floodplains and main channel is strongly non-uniform. Defining the distribution of flow velocity is an important factor in calculation of sediment transport and estimation of flow discharge. One of the correction factors in calculation of flow discharge and shear stress are momentum and energy  coefficients. In this study, the effect of  and  coefficients on Froude number and specific energy are assessed. Stage-discharge relationship in compound open channel was assessed using some empirical formula including Single-Channel Method (SCM), Divided-Channel Method (DCM), and modified divided-channel method (MDCM) and compared with together. When the discharge only flows in main channel all the empirical has a same result whereas by increasing the discharge and covering the floodplains by flow the results of them are different. The highest value of outcome of empirical formula is related to the SCM. Results indicated that considering the energy and momentum coefficients have significant effect on distribution of Froude number and specific energy. Distribution of velocity of flow in compound open channel due to interaction of floodplains and main channel is strongly non-uniform. Defining the distribution of flow velocity is an important factor in calculation of sediment transport and estimation of flow discharge. One of the correction factors in calculation of flow discharge and shear stress are momentum  and energy  coefficients. In this study, the effect of  and  coefficients on Froude number and specific energy are assessed. Stage-discharge relationship in compound open channel was assessed using some empirical formula including Single-Channel Method (SCM), Divided-Channel Method (DCM), and modified divided-channel method (MDCM) and compared with together. When the discharge only flows in main channel all the empirical has a same result whereas by increasing the discharge and covering the floodplains by flow the results of them are different. The highest value of outcome of empirical formula is related to the SCM. Results indicated that considering the energy and momentum coefficients have significant effect on distribution of Froude number and specific energy.

کلیدواژه ها:

Stage-discharge relationship Flow discharge Velocity distribution Energy and momentum coefficients

نویسندگان

Abbas Parsaei

Department of water Engineering, Lorestan University, Khorramabad, Iran.

Amir Hamzeh Haghiabi

Department of water Engineering, Lorestan University, Khorramabad, Iran.