Mean flow characteristics, vertical structures and bed shear stress at open channel bifurcation
سال انتشار: 1396
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 414
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_ARWW-4-1_003
تاریخ نمایه سازی: 24 شهریور 1398
چکیده مقاله:
Water supply from rivers is accomplished with flow diversion through an intake structure. A lateral intake like bifurcation is the simplest method to withdraw water. However, flow at a channel bifurcation is turbulent, highly three-dimensional (3D) and so has many complex features. This paper reports a 3D numerical investigation of these features in an open channel flow. Simulations have been done on rectangular channel geometry, with smooth bed and sidewalls. The standard k-ɛ, k-ω model of the Wilcox, and RSM turbulence models are compared using the commercial code FLUENT. The simulation results have been compared with available experimental data. It was found that all of the turbulence models tested here accurately predicted velocity profiles in the main channel but in the branch channel, the RSM model with the k-ω model performing better than the k-ɛ model. Predicted flow physics are in close agreement with previously reported experimental results.
کلیدواژه ها:
نویسندگان
Akbar Safarzadeh
Department of Technical Engr., University of Mohaghegh Ardabili, Iran
Babak Khaiatrostami
Research Department, Ardabil Regional Water Co., Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :