Effect of 3D printing process parameters on mechanical properties of PLA specimens
سال انتشار: 1397
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 591
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
COMPOSIT06_012
تاریخ نمایه سازی: 31 تیر 1398
چکیده مقاله:
Fused deposition modelling (FDM) is a rapidly growing additive manufacturing technology due to its ability to build functional parts have complex geometries. The mechanical properties of fabricated specimens depend on 3D printing process parameters. In this study, the effect of infill density and printing speed are experimentally investigated on the tensile properties of PLA specimens. To this end, a dog-bone tensile specimen with dimensions selected from ASTM D638 standard is modelled in Catia software and a STL file is generated. Then, this file is converted to G-codes using Cura software. FDM 3D printer prints the specimen from these G-codes. Specimens with three infill densities, i.e., 20%, 40% and 60% with constant printing speed 40 mm/s are printed and tested under quasi-static tensile test. Results show that infill density has significant effect on the modulus of elasticity, maximum strength and failure strain.
کلیدواژه ها:
نویسندگان
M Heidari-Rarani
Assistant Professor, Department of Mechanical Engineering, Faculty of Engineering, University of Isfahan, Isfahan, Iran
P SADEGHI
Bachelor Student, Department of Mechanical Engineering, Faculty of Engineering, University of Isfahan, Isfahan, Iran
E EZATI
Bachelor Student, Department of Mechanical Engineering, Faculty of Engineering, University of Isfahan, Isfahan, Iran