Elastic-Plastic Analysis of Bending Moment – Axial Force Interaction in Metallic Beam of T-Section
سال انتشار: 1398
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 309
فایل این مقاله در 12 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JACM-5-1_014
تاریخ نمایه سازی: 19 تیر 1398
چکیده مقاله:
This study derives kinematic admissible bending moment – axial force (M-P) interaction relations for mild steel by considering elastic-plastic idealizations. The interaction relations can predict strains, which is not possible in a rigid perfectly plastic idealization. The relations are obtained for all possible cases pertaining to the locations of neutral axis. One commercial rolled steel T-section is considered for studying the characteristics of interaction curves for different models. On the basis of these interaction curves, most significant cases for the position of neutral axis which are enough for the establishment of interaction relations are suggested.
کلیدواژه ها:
نویسندگان
Hossein Hatami
Department of Civil Engineering, Lorestan University, Khorram Abad, Iran
Mojtaba Hosseini
Department of Mechanical Engineering, Lorestan University, Khorram Abad, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :