Modifying the wear behavior of POM gears in diaphragm gas meters with nano-particles
محل انتشار: شانزدهمین کنگره ملی مهندسی شیمی ایران
سال انتشار: 1397
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 279
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
NICEC16_299
تاریخ نمایه سازی: 7 خرداد 1398
چکیده مقاله:
The internal plastic parts of diaphragm gas meters are made of Polyoxymethylene (POM). The most important part of these are the gears of the index window. The spin of these gears shows the correct amount of gas consumed. Unfortunately, these gears wear and tear on their tips. To tackle that and in order to assess the possibility of modifying the abrasive strength of this polymer, its nanoclaynanocomposites with 0.5 and 1 wt% were prepared via an internal mixer. These nanocomposites were shaped as a cylinder and placed in an abrasion wear tester. The results showed that both nanocomposites have shown increased abrasive wear resistance, and the best case was for the 0.5 wt% sample.
کلیدواژه ها:
نویسندگان
Fatemeh Khoshkar
Dept. of Chemical Engineering, Shiraz Branch, Islamic Azad University, Shiraz, Iran ۷۱۹۸۷-۷۴۷۳۱
M.Sadegh Tavallali
Dept. of Chemical Engineering, Shiraz Branch, Islamic Azad University, Shiraz, Iran ۷۱۹۸۷-۷۴۷۳۱
Reza Jahedi
Dept. of Mechanical Engineering, Shiraz Branch IslamicAzad University, Shiraz Iran ۷۱۹۸۷-۷۴۷۳۱
Hashem Masumi
R&D Office, Fars Province Gas Company