Nano-Mechanical Properties and Biomedical Application of Biodegradable Hybrid Organic-Inorganic Nanocomposites Based on Unsaturated Polyester Resins and Polyhedral Oligomeric Silsesquioxane

سال انتشار: 1388
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,763

متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

CNS03_209

تاریخ نمایه سازی: 21 دی 1388

چکیده مقاله:

Novel nanocomposites were prepared for biomedical applications including bone filler and substitute in different compositions. Polyhedral oligomeric silsesquioxane (POSS) of multiple acrylate functionality was used as a nano-sized filler also crosslinking agent embedded in a polymeric matrix composed of aliphatic unsaturated polyester resins endcapped with acrylate functional groups e.g. poly(e-caprolactone diacrylate). Nanocomposites were prepared via visible light photo crosslinking of compounds comprised of a homogeneous mixture of the resin, nano-filler, photo initiator and accelerating agent. After through characterization of the networks via different analytical techniques, nano-mechanical properties were also evaluated using atomic force microscopy (AFM) in indentation and scratch modes using a Berkovich tip. Stiffness and elastic modulus were significantly improved in higher POSS contents however; hardness and scratch work were decreased from its maximum at 2% with increasing in filler content. High values were observed for elastic recovery even for all nanocomposites. Friction and scratch coefficient were also determined. Biological application of the nanocomposites is also reported.

کلیدواژه ها:

Polyhedral Oligomeric Silsesquioxanes (POSS) ، Unsaturated Aliphatic Polyesters ، Nanocomposites ، Nano-Mechanical Analysis

نویسندگان

M Imani

Department of Novel Drug Delivery Systems, Iran Polymer and Petrochemical Institute, Tehran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Joshi M. and Butola BS , Journal of Macromolecu lar ...
  • Kannan RY., Salacinski HJ., Butler PE., and Seifalian AM., Acc. ...
  • Li G., Wang L, Ni H., and Charles l Pittman ...
  • Opinion in Solid State and Materias Science, 8 (2004) 21-29. ...
  • Hasirci V. et al, J. Biomater. Sci. Polymer Edn, 17, ...
  • Imani M. et al. Biomedical Materials Research, Part A; DOI: ...
  • نمایش کامل مراجع