Evaluation of Electrical Resistance Activation Energy of Coated Interconnects with Nano Spinel
محل انتشار: دومین همایش ملی نانو مواد ونانوتکنولوژی
سال انتشار: 1389
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,352
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
NAYRC02_104
تاریخ نمایه سازی: 10 دی 1388
چکیده مقاله:
In order to improve electrical conductivity and oxidation resistance of solid oxide fuel cells (SOFCs) interconnects, these interconnects can be coated with a protective layer. In this research pack cementation method was employed to coat the AISI 430 ferritic stainless steel a manganese-base pack mixture. During oxidation tests the coating layer converted to the Mn3O4 spinel and MnFe2O4 nano spinel. Isothermal oxidation was applied at 800 ºC for 200 h to evaluate the area specific resistance (ASR) values. Electrical resistance activation energy was evaluated by use ofprevious consequences. Results showed that the activation energy decreases when the temperature decreases and coated samples electrical resistance activation energy was lower than uncoated ones.
کلیدواژه ها:
Solid oxide fuel cell ، AISI 430 ferritic stainless steel ، Oxidation ، Area specific resistance ، Activation energy
نویسندگان
H Ebrahimifar
Post graduate student, Department of Material Science and Engineering, Shahid Bahonar University of Kerman
M Zndrahimi
Associate Professor, Department of Material Science and Engineering, Shahid Bahonar University of Kerman
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :