Investigation of iron removal process from silica by acid leaching
سال انتشار: 1397
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 478
فایل این مقاله در 9 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IMES12_029
تاریخ نمایه سازی: 11 اردیبهشت 1398
چکیده مقاله:
Silica has to possess special properties in certain applications. Amongst the major impurities in silica which adversely affect its properties, are iron and ferrous compounds. In this study an effort has been made to remove iron from silica by phosphoric acid in simple and inexpensive way. The effects of the three parameters of temperature, acid concentration, and time on two different particle sizes of 100 and 200 μm were examined. The amount of iron dissolved in the acid solution of each sample was determined by atomic absorption spectroscopy (AAS).According to the results, it was evident that since the surface areas of the smaller particles in contact with the solution were larger, the efficiency of the process improved. In conclusion, dissolution in the acid solution of 1.0 M, over the time of 120 min, and at the temperature of 80°C resulted in the highest efficiencies of 53% and 41% for the particle sizes of 100 μm and 200μm, successively.
کلیدواژه ها:
نویسندگان
Hassan Koohestani
Faculty of Materials and Metallurgical Engineering, Semnan University, Semnan
Mohammad Reza Golahdooz
Faculty of Materials and Metallurgical Engineering, Semnan University, Semnan
Mahdi Maarefvand
Department of Materials Science and Engineering, Sharif University of Technology, Tehran
Amirabbas Kheilnejad
Instructor Training Center and Technical and Vocational Researches, University of Applied Sciences and Technology, Tehran.