Experimental Study on Interrelationship of Gate Design – Processing Parameters – Shrinkage in Injection Molding
سال انتشار: 1384
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,368
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICME07_139
تاریخ نمایه سازی: 6 آذر 1388
چکیده مقاله:
An experimental investigation is presented on shrinkage of injection molded part and its relationship with gate design and processing parameters. Accuracy in molded parts is directly related to the accuracy of shrinkage prediction. Although, the effects of processing parameters on shrinkage have been well explored, the studies on influence of mold design have not been reported extensively. In this research work, the effect of gate dimention on final shrinkage and its relation with holding pressure and time are investigated. The results have been explained using PVT diagram, showing that an optimum gate dimention can be achieved to yield minimum shrinkage.
کلیدواژه ها:
نویسندگان
A.H Behravesh
Mechanical Engineering Department,Tarbiat Modarres University, Tehran, Iran
H Motabar
Mechanical Engineering Department,Azad University, Science and Research Centre,Tehran, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :