Surface investigation and stress analysis of coated systems under contact loading using FEM modeling
محل انتشار: دهمین کنفرانس ملی مهندسی ساخت و تولید
سال انتشار: 1388
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,815
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICME10_305
تاریخ نمایه سازی: 29 آبان 1388
چکیده مقاله:
A tribological analysis of deformations and stresses generated and their influence on surface failure in a coated surface loaded by line and point contact loading is presented.A plain strain finite element method (2D FEM) model has been developed for calculating the stresses and deformations for 20mmthick tungsten-carbon (WC) / Ductile tungsten (W) coated steel in line contact loading and a three dimensional finite element method (3D FEM) model has been developed for 5mmthick titanium nitride (TiN) coated steel surface in point contact loading. In both cases the stress field was obtained under normal and tangential loads. Because of high shear stress at the interfaces the interfacial shear stress may be the main reason for damage of the coating / substrate interfaces. When the indenter is slipping, tangential tensile stress is caused in coating behind the indenter, while in front of the indenter the tangential stress is compressive.
نویسندگان
S Rash Ahmadi
Assistant Professor, Faculty of Mechanical Engineering,Urumia University
Taher Azdast
Assistant Professor,Faculty of Mechanical Engineering,Urumia University
Saeed Hoseinpour Dash Atan
M.Sc. Student Faculty of Mechanical Engineering,Urmia University
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :