The effect of graphite upon brazability of ferrous powder metallurgy components using Anchorbraze 72 filler metal
محل انتشار: ششمین کنفرانس بین المللی متالورژی پودر
سال انتشار: 1397
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 400
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
PMAUTO06_128
تاریخ نمایه سازی: 23 آذر 1397
چکیده مقاله:
This paper deals with brazing ferrous powder metallurgy components using Anchorbraze 72 filler metal at various graphite additions.Two brazing conditions namely simultaneous sinter-brazing and brazing after sintering were performed. Alloying constituents in the filler metal led to various phases in the brazing zone. Nickel and copper concentration were detected near the surface while manganese and silicon reacted with oxygen and carbon and were observed around the pores. Microstructure and properties were evaluated using optical and electron microscopes together with microhardness tests.
نویسندگان
Alireza Rashidnejad
MEng student, selection and properties of engineering materials
Alireza Ebrahimi
Associate professor, Amirkabir university of technology
Nader Parvin
Associate professor, Amirkabir university of technology