Crevice Corrosion Investigation of Nickel and AISI316 Stainless Steel and Introducing Controlling Method
محل انتشار: همایش ملی مهندسی شیمی
سال انتشار: 1388
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,933
فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
NCCEESLAMSHAR01_222
تاریخ نمایه سازی: 9 آبان 1388
چکیده مقاله:
Corrosion is a destructive and cost producing phenomena, that annually causes wasting massive amount of world conserves. A well known and very destructive type of corrosion is crevice corrosion, which usually is watched in crevices, and narrow clearances between two parts of attached metals in a corrosion media. Although, so many experiments have been done to reveal the mechanism and to discover methods leading to preventing this type of corrosion. This work has been devoted to the crevice corrosion and introduces a simple method to prevent that. In this method, attempt has been down to minimize the dead space that causes the crevice corrosion. The attention has been taken into AISI 316 stainless steel and nickel as metallic samples.
کلیدواژه ها:
نویسندگان
Heidar Abbasi
Payam noor University of Khormuj, Iran
Arash. Dehghani
Department of Chemical Engineering, University of Shiraz, Shiraz, Iran
Hojat hafighzadeh
Department of Chemical Engineering, Malek Ashtar University of Tehran, Tehran, Iran
Shahryar Amirahmadi
Department of Chemical Engineering, Persian Gulf University of Bushehr, Bushehr, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :