Investigation of the Effect of Control Measures on Reduction of Risk Events in an Edible Oil Factory in Tehran, Iran
محل انتشار: مجله آرشیو علوم بهداشتی، دوره: 6، شماره: 3
سال انتشار: 1396
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 559
فایل این مقاله در 9 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_AHS-6-3_004
تاریخ نمایه سازی: 19 آبان 1397
چکیده مقاله:
Background & Aims of the Study: Identification of hazards is one of the first goals of riskanalysis. Failure mode and effect analysis method (FMEA) is universally defined as efficientprocedures for finding potential failures aimed to remove or decrease the risk which is related tothem. This study aimed to investigate the effect of control measures on reduction of risk eventsin an edible oil factory in Tehran.Methods: This cross-sectional study was conducted in an edible oil factory in Tehran, Iran. Forthis, a four-member team of safety engineer experts was formed. Some factory units wereselected randomly. After that, in all units, probability, severity and detection probability ofhazards in all processes and tasks were assessed based on FMEA method. Regarding to the RPN,some control measures were taken to reduce the risk of events. After 9 months, risk assessmentwas repeated; primary and secondary RPNs were compared with each other to investigate theeffect of interventions.Results: The results showed that highest and lowest probability of hazard were related toinstallation and can production unit, respectively. The highest and lowest severity of hazard wererelated to tool and can production unit, respectively. There was a significant difference betweenthe probability of hazard in can-making and filling units, before and after the interventions. Therewas a significant difference between the severity of hazard in can-making, filling andneutralization units, before and after the interventions. As well, total probability, severity andRPN had a significant difference in all parts of the factory before and after the interventions.Conclusions: According to the results of this study and the overall risk reduction caused byinterventional measures, it can be concluded that, FMEA is a successful method for identifyinghazards and risk control measures.
کلیدواژه ها:
نویسندگان
Malihe Kolahdouzi
Department of Occupational Health Engineering, School of Health,Yazd Shahid Sadoughi University of Medical Sciences,Yazd,Iran
Gholam Hossein Halvani
Department of Occupational Health Engineering, School of Health,Yazd Shahid Sadoughi University of Medical Sciences,Yazd,Iran
Ebrahim Nazaripour Abdehgah
Department of Occupational Health, School of Health, Bam University of Medical Sciences, Bam, Iran
Maryam Ghaljahi
Department of Occupational Health Engineering, School of Health, Zabol university of medical sciences, Zabol, Iran