Numerical Assement Methods for Detection of Stress Corrosion Cracking (SCC)
محل انتشار: یازدهمین کنگره ملی خوردگی ایران
سال انتشار: 1388
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,159
فایل این مقاله در 11 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
INCC11_144
تاریخ نمایه سازی: 3 مهر 1388
چکیده مقاله:
Stress Corrosion Cracking (SCC) is a normal phenomenon occurring in engineering of solids and should not be looked upon as either magic or a surprise occurrence . It is a natural phenomenon, and the fact that it is so limiting to the performance capability of engineering solids should not be a reason for omitting it from design. SCC is a low probability , high consequence event. This paper reviews the numerical assessment methods for detectiong Stress Corrosion Cracking (SCC). It is indicated that the In-secant formula and the Level 2 Strip Yield Model could be very conservative , with significant variances in the level of conservatism, though, unlike the In-secant formula , the Level 2 Strip Yield Model was not consistently conservative. On the other hand , the predictability for both the PAFFC and CorLAS TM criteria was shown to be much better , with CorLA TM being the more accurate of the two the In-secant criterion is not appropriate for obtaining a very accurate assessment of pipe failure pressures for lines containing SCC.
کلیدواژه ها:
نویسندگان
Mansoor Farzam
Petroleum University of Technology
Hadi Ebrahim Fathabadi
Petroleum University of Technology
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :