سیویلیکا را در شبکه های اجتماعی دنبال نمایید.

Studying the Effects of Degassing Treatment and Adding Coupling Agent on Flexural Properties of Milled Fiber/Epoxy Composites

سال انتشار: 1395
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 363

متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دانلود نمایند.

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

COMPOSIT05_039

تاریخ نمایه سازی: 6 مهر 1397

چکیده مقاله Studying the Effects of Degassing Treatment and Adding Coupling Agent on Flexural Properties of Milled Fiber/Epoxy Composites

It the current work, different composite samples have been fabricated through mixing and stirring 1wt.% of milled E-glass, S-glass, and high strength carbon fibers with a commercial hot-cure epoxy resin. The effects of performing a medium pressure degassing treatment and integral blending of a silane coupling agent were evaluated based on the flexural properties of the samples. After conducting the three-point bend tests, the fractured surfaces were investigated by a Scanning Electron Microscope (SEM) to find the involved toughening mechanisms. According to the results, interface de-bonding, fiber pull-out, and fish-bone mechanisms were activated in numerous sites. Furthermore, the flexural properties of the silane-modified and degassed epoxy reinforced with the milled E-glass fiber were improved more than that of the other composite samples and the pure epoxy.

کلیدواژه های Studying the Effects of Degassing Treatment and Adding Coupling Agent on Flexural Properties of Milled Fiber/Epoxy Composites:

نویسندگان مقاله Studying the Effects of Degassing Treatment and Adding Coupling Agent on Flexural Properties of Milled Fiber/Epoxy Composites

S Karimi

PhD, Materials Science and Engineering Department, School of Engineering, Shiraz University, Shiraz, Iran

S.Y GOODARZI

MS, Mechanical Engineering Department, School of Engineering, Islamic Azad University of Shiraz, Shiraz, Iran

R Babaei Moghadam

PhD Student, Aerospace Engineering Department, School of Engineering, Shiraz University, Shiraz, Iran

S Javadpour

Professor, Materials Science and Engineering Department, School of Engineering, Shiraz University, Shiraz, Iran