Burst modeling of type IV high pressure storage vessel

سال انتشار: 1395
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 433

متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

COMPOSIT05_035

تاریخ نمایه سازی: 6 مهر 1397

چکیده مقاله:

Composite overwrapped pressure vessels produced by filament winding process have been developed rapidly in the field of hydrogen storage. Today the current simplified models should be improved for better simulating the reality. Thus, the complex wound composite geometry and orientation are simulated using a specific ABAQUS plug-innamed Wound Composite Modeler (WCM). In this study, a type IV high pressure vessel with inner volume of 2.5 L is analyzed. It is composed of three different parts: the metallic bosses made of 316L stainless steel, the polymeric liner (PA6) and the carbon fiber/epoxy composite shell. The vessel is simulated as an axisymmetric model. Finally, numerical results are compared with available experimental data in the literature

کلیدواژه ها:

Wound composite modeler (WCM) ، Type IV pressure vessel ، Finite element simulation ، Burst pressure

نویسندگان

M Heidari-Rarani

Assistant Professor, Department of Mechanical Engineering, University of Isfahan, Isfahan, ۸۱۷۴۶-۷۳۴۴۱, Iran

M Ahmadi-Jebeli

Undergraduate Student, Department of Mechanical Engineering, University of Isfahan, Isfahan, ۸۱۷۴۶-۷۳۴۴۱, Iran

E Baniasadi

Assistant Professor, Department of Mechanical Engineering, University of Isfahan, Isfahan, ۸۱۷۴۶-۷۳۴۴۱, Iran