A Hydrothermal Treatment for Preparation of Mordenite Membranes
محل انتشار: ششمین کنگره بین المللی مهندسی شیمی
سال انتشار: 1388
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,507
فایل این مقاله در 5 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICHEC06_172
تاریخ نمایه سازی: 1 مهر 1388
چکیده مقاله:
A seeded in situ hydrothermal treatment was used to synthesize tubular supported mordenite (MOR) membranes. The pervaporative properties of the membranes were evaluated in dehydration of water/ethanol mixtures. Commercial mordenite powder was used to completely seed the outer surface of the supports by soaking them into a suspension solution before hydrothermal synthesis. X-ray diffraction (XRD) patterns of the zeolite crystals formed on the mullite support revealed the mordenite peaks. The membranes were also characterized by scanning electron microscopy (SEM). The results showed that oriented, intergrown mordenite crystals covered the outer surface of the substrate tubes duringthe hydrothermal process. The membrane layer thickness was about 20 μm. Typical membranes yielded water/ethanol separation factors of 65-562 for different feeds concentrations. The results confirmed that the membranes were defectfree.
کلیدواژه ها:
نویسندگان
Morteza Asghari
Separation Processes Research Group (SPRG), Department of Engineering, University of Kashan, Ghotb-e-Ravandi Ave., Kashan,
Toraj Mohammadi
Research Laboratory for Separation Processes, Faculty of Chemical Engineering, Iran University of Science and Technology, Narmak, Tehran, Iran,
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :