Effect of PCA on the Amorphization of Graphite During High Energy Ball Milling
سال انتشار: 1396
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 463
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IMES11_323
تاریخ نمایه سازی: 7 اسفند 1396
چکیده مقاله:
Ball milling of graphite to obtain an amorphous phase is usually encounter with some difficulties. It seems the most important problem is adhesion graphite particles together and to vial surface. A suitable PCA is very effective and essential to prevent above difficulties. In the present work, the effect of PCA on the behavior of graphite during ball milling was investigated. Stearic acid and ethanol as PCA were used and their effects were compared. Results showed that Stearic acid was more effective in preventing agglomeration of graphite particles, which was attribute to the more lubricating effect of stearic acid. The best condition was obtained by adding 1 weight percentage of stearic acid every 24 hours of milling to the vial.
کلیدواژه ها:
نویسندگان
Seyed Oveis Mirabootalebi
Master student of Nanotechnology-Nanomaterials,
G.H Akbari
Associate Professor, Material science and engineering,
Shahriar Sharafi
Professor, Material science and engineering,
Reza Mirahmadi Babaheydari
Master student of Nanotechnology-Nanomaterials,