Hysteresis Curves Analysis of Cyclic Indentation Tests
محل انتشار: دهمین سمینار ملی مهندسی سطح و عملیات حرارتی
سال انتشار: 1388
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,279
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ISSE10_003
تاریخ نمایه سازی: 1 فروردین 1388
چکیده مقاله:
Cyclic Vickers indentation test was modeled by finite element method. Theindented material behavior was considered as nonlinear kinematic hardening. five different combinations of material model parameters were used for modeling. Maximum displacement was fixed and the variation of the maximum load and residual displacement were obtained. Their variations were found to be linear and can be used to characterize the nonlinear behavior of materials.
کلیدواژه ها:
نویسندگان
A Nayebi
Mechanical Engineering Department, Shiraz University