A Study of Plastic Deformation Behavior of AA1050 Aluminum Alloy duringPure Shear Extrusion with Back Pressure
سال انتشار: 1395
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 428
فایل این مقاله در 5 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IIAC04_099
تاریخ نمایه سازی: 22 دی 1396
چکیده مقاله:
In the present study, the effect of back pressure on the filling fraction of dies during pure shear extrusion, a novel severe plastic deformation process, is investigated by finite element analysis. The applied load predicted by simulation during the pure shear extrusion process is verified and a good agreement between the predicted results at a Coulomb friction factor of 0.12 and experimentsis found. Next, various amounts of back pressure are applied to a plunger at the exit channel of the dies, and their influence on the filling fraction of the die are studied.
کلیدواژه ها:
نویسندگان
Missam Irani
School of Mechanical and Aerospace Engineering, Gyeongsang National University, Jinju-City, ۶۶۴-۹۵۳, Republic of Korea
Mansoo Joun
Engineering Research Institute, School of Mechanical and Aerospace Engineering, Gyeongsang National University, Jinju-City, ۶۶۴-۹۵۳,Republic of Korea
Amirhossein Meysami
Department of Materials Science and Engineering, Golpayegan University of Technology
Reza Amini
Department of Materials Science and Engineering, Golpayegan University of Technology