Corrosion, Erosion and Erosion-Corrosion Performance of Plasma Electrolytic Nitrocarburising (PEN/C) on AlSI 4140 Steel
محل انتشار: دهمین کنگره ملی خوردگی ایران
سال انتشار: 1386
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,730
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
INCC10_020
تاریخ نمایه سازی: 4 اسفند 1387
چکیده مقاله:
Plasma electrolytic nitro carburizing (PEN/C) has been used on the surface to modify AlSI 4140 steel to a depth of approximately 200 um of compound and diffusive layer. Potentiodynami.c polarizations and electrochemical impedance spectroscopy (EIS) have been made understatic conditions in order to evaluate the corrosion performance ofPEN/C coatings. The erosion and erosion-corrosion performance of the PEN/C coating has also been assessed with a rotating disk electrode at specified rates ofstirring, with and without a given potential to the sample. The erosion and eroaion-corrosion tests were carried out using sub angular sand particles, ranging in size from 135 to 235 Jlm. Scanning electron microscopy (SEM) was used to investigate the coating microstructure and the
coating/substrate interlace. The analysis shows that the PEN/C nitrocarburised coatings studied in this investigation had a poreIcrack network. to the steel sub strate, which compromised the corrosion and erosion-corrosion perfurmance.
کلیدواژه ها:
Erosion-Corrosion ، Plasma electrolytic nitro carburizing ، Ceramic coating ، Rotating disk electrode ، AISI 4140 steel
نویسندگان
M Aliofkhazraei
Faculty ofEngineering, Department ofMaterials Science, Tarbiat Modares Master ofScience
A.R Sabour
Faculty ofEngineering, Department ofMaterials Science, Tarbiat Modares Assistantprofessor
T shahrabi
Faculty ofEngineering, Department ofMaterials Science, Tarbiat Modares Associateprofessor
S.H Hedayat Mofidi
Faculty ofEngineering, Department ofMaterials Science, Tarbiat Modares Master ofScience