Seismic Demand of RC Moment Frames with Infill Masonry Walls
محل انتشار: هشتمین کنگره بین المللی مهندسی عمران
سال انتشار: 1388
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,185
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICCE08_050
تاریخ نمایه سازی: 28 آبان 1387
چکیده مقاله:
Infill masonry walls are commonly constructed in the exterior frames of RC moment frame buildings. Their effects on the behavior of the RC moment frame buildings typically are ignored during design process. This study investigates the effect of infills on seismic characteristics of RC moment frames. A typical 4-story intermediate RC moment frame was designed for a specified seismic hazard level and satisfies the minimum requirements of relevant codes. To evaluate the effects of infills, masonry walls are added in exterior frames. A nonlinear 3D analysis was performed to determine maximum plastic rotations, plastic hinge formation pattern, drift demand, lateral stiffness and strength. The results were compared with the behavior of the initial RC moment frame without infills. The results show significant differences in seismic demands of the entire structure, such as decrease in drift and ductility.
کلیدواژه ها:
نویسندگان
Hosein Ghaffarzadeh
Assist. Prof., Faculty of Civil Eng, University of Tabriz, Tabriz, Iran
Leila Keyvani
M.Sc. Student of Structural Eng., Faculty of Civil Eng, University of Tabriz, Tabriz, Iran
Mona Rahmani
M.Sc. Student of Earthquake Eng., Faculty of Civil Eng, University of Tabriz, Tabriz, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :