Effect of milling process on wheat Ahwaze 1 cultivar
سال انتشار: 1395
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 389
فایل این مقاله در 12 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
MDMCONF01_120
تاریخ نمایه سازی: 18 تیر 1396
چکیده مقاله:
The effect milling process on wheat Ahwaze 1 cultivar, was studied based on some technical indicators, Two types of machines ( Cylinder and Hammer), were tested at three ranges speed of 0.717 , 0.820 and 0.921. The experiments were done in a factorial experiment under complete randomized design with three replications. The results showed that the Cylinder machine was significantly better than Hammer machine in all studied condition. The results showed a production process of 1.683 and 1.446 tonhr, power consumption of 15.281 and 16.405 kW, milling efficiency of 86.446 and 85.312 %, pr0tien percentage 7.257 and 6.460% and bran percentage of 5.140 and 6.292 % for Cylinder and Hammer machines .
کلیدواژه ها:
نویسندگان
Mussa.B Aljubory
Department of Agricultural Machinery, University of Al-fourt , Iraq
Mohammad H Kianmehr
Department of Agricultural Machinery, University of Al-fourt , Iraq
Akbar Arabhosseini
Department of Agricultural Machinery, University of Al-fourt , Iraq
Ali.M Kermani
Department of Agricultural Machinery, University of Al-fourt , Iraq
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :