THE EFFECT OF SURFACE PREPARATION OF TITANUMSUBSTRATE ON MORPHOLOGY AND STRUCTURE OF ANODCTTANUMOXDENANOTUBE ARRAYS
سال انتشار: 1390
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 418
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
UFGNSM03_214
تاریخ نمایه سازی: 10 تیر 1396
چکیده مقاله:
In this work, we employed two surface polishing methods including mechanical polishing and electropolishing, to prepare the pure titanium substrate before anodic oxidation. It is aimed to understand the effect of different surface characteristics on the structure, tube morphology and ordering of titanium oxide nanoporous films. We performed potentiostatic anodic oxidation of pure titanium foils prepared by the two polishing methods under 60V in ethylene glycol, 4% wt HPO, and 0.25% wt HF at 30°C to obtain titanium oxide nanotubular structure. Morphology of the TiO2 nanotube arrays was studied using field emission scanning electron microscopy (FESEM). Current transients were recorded during the potentiostatic anodization. We find that anodic oxidation of titanium after electropolishing produces the most homogeneous TiO, nanotubes with a high ordering degree across the surface. FESEM images show that TiO2 nanotube formed after electropolishing surfaces exhibits a smooth surface at the top of the grown film.
کلیدواژه ها:
نویسندگان
N. S. PEIGHAMBARDOUST
Department of Materials Engineering, Sahand University of Technology, Tabriz, Iran
F. NASIRPOURI
Department of Materials Engineering, Sahand University of Technology, Tabriz, Iran
E. MOSLEHIFARD
Department of Prosthodontics, Faculty of Dentistry, Tabriz University of Medical Sciences, Tabriz, Iran