Calculation of vertical pressure by estimating the density graph and integration of seismic data, three-dimensional charts and graphs well
محل انتشار: دومین کنفرانس ملی ژئومکانیک نفت
سال انتشار: 1395
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 397
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
NPGC02_191
تاریخ نمایه سازی: 10 تیر 1396
چکیده مقاله:
In most oil / gas wells, the P-wave transit time and density graphs are often used to drive reservoir properties such as porosity, permeability and lithology. Moreover, these graphs can be used to calculate and provide the pore pressure model. Economically, indirect methods using seismic data, is most effective, due to the relatively high cost and local information provided by direct measurement of pore pressure in wells. In order to estimate formation pressure from seismic data, estimation of the vertical pressure is required. In this study, to calculate vertical pressure at any depth, a density volume was obtained via studying of seismic attributes. Based on correlation of well log data and estimated density values in well location; density cube estimated based on multi-attribute approach, introduced as suitable result. Then the volume of vertical pressure was calculated using the relationship between the vertical pressure and density, which represents the vertical pressure at any depth.
کلیدواژه ها:
نویسندگان
Y. Fazli
Department of Geophysics, North Tehran Branch, Islamic Azad University, Tehran, Iran
A. Naderi
Department of Geophysics, Research Institute of Petroleum Industry, Tehran, Iran
N. Keshavarz
Department of Geophysics, Research Institute of Petroleum Industry, Tehran, Iran