Synthesis of Al-CNT Nanocrystalline-Nanocomposite Powder Particles by Mechanical Milling

سال انتشار: 1388
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,044

فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

NAYRC01_008

تاریخ نمایه سازی: 17 مهر 1387

چکیده مقاله:

In this paper mechanical alloying was used for dispersing different content of carbon nanotube in Al6061 powder particles. The effect of milling time and process parameters on morphology, particle size distribution and decreasing rate of powder particle size (K) during milling was quantified by scanning electron microscopy (SEM) and laser particle size analyzer. It was concluded that by 4h milling of Al-5wt%CNT powder mixture a homogeneous distribution of CNT in flattened Al powder particles could be achieved. Particle size distribution results showed that the average particle size (D50) decreased by increasing milling time and CNT content. It was also shown that increasing milling time and decreasing CNT content decreased K index. In addition X-Ray diffraction studies revealed that nanocrystalline aluminum powder particles could be achieved by milling of powder mixture for optimum milling time.

نویسندگان

M Jamshidi Jam

۱Materials Engineering Department, Islamic Azad university-Sirjan Branch

M. Khakbiz

School of Metallurgy and Materials Engineering, University of Tehran

A Akbari

Materials Engineering Department, Islamic Azad university-Sirjan Branch

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • A.G. Mamalis, L.O.G. Vogtlander, A. Markopou los, «Nanotech nology and ...
  • T. Laha, A. Agarwal, T. McKechnie, S. Seal, "Synthesis and ...
  • S. Zhou, X. Zhang , Z. Ding , C. Min ...
  • C.F. Deng, D.Z. Wang, X. X. Zhang, A. B. Li, ...
  • C. Su ryanarayana, «Mechan ical Alloying and Milling ", Progress ...
  • M. Khakbiz, F. Akhlaghi, "Effect of Mechanical Alloying Process Parameters ...
  • M. Khakbiz, F. Akhlaghi, "Synthesis and Structural C h aracterization ...
  • J. B. Fogagnolo, F. Velasco, M. H. Robert, J. M. ...
  • Z. Razavi Hesabi , A. Simchi _ S.M. Seyed Reihani ...
  • N. Zhao, P. Nash, X. Yang, "The Effect of Mechanical ...
  • G.K. Williamson, W.H. Hall, "X-ray Line Broadening From Field Aluminum ...
  • Mechanisms of _ icrostructure ژ [12] K.H. Chung J. He, ...
  • نمایش کامل مراجع