Synthesis of PBr- acrylic core-shell particles as impact modifier through seeded emulsion polymerization
محل انتشار: دهمین سمینار بین المللی علوم و تکنولوژی پلیمر
سال انتشار: 1391
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 482
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ISPST10_056
تاریخ نمایه سازی: 6 اردیبهشت 1396
چکیده مقاله:
In order to increase the impact strength of a brittle polymer,elastomeric particles are usually incorporated in the composite formulation, but at the most basic level, rubber particles act asstress concentration area [1]. This is because of incompatibility between elastic part and matrix, whichaccelerate shear yielding in the matrix under the wide range ofloading conditions [1]. To avoid this problem, core-shell particles with rubbery core and a compatible shell could beused instead of bare rubbery particles. The shell of modifier functions as a layer that physically binds the matrix to therubber core. In order to obtain the core-shell impact modifier technology, one should have the technical viewpoint of emulsion polymerization process
نویسندگان
Ali Gharieh
Polymer science department, Iran polymer and petrochemical institute, P.O.BOX 14965/115, Tehran, Iran
Ali Reza Mahdavian
Polymer science department, Iran polymer and petrochemical institute, P.O.BOX 14965/115, Tehran, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :