Effect of long fibers angle on transverse strength in polyester pultruded rod
محل انتشار: یازدهمین سمینار بین المللی علوم و تکنولوژی پلیمر
سال انتشار: 1393
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 377
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ISPST11_411
تاریخ نمایه سازی: 6 اردیبهشت 1396
چکیده مقاله:
In Pultrusion process unidirectional long fibers (UD) has the most application as a reinforcer element due to high reinforcing level. But pultrusion process only can use this type of fibers on the longitudinal direction. Therefore the products of this process having high modulus and strength in the longitudinal direction but have low level of modulus and strength in the transverse direction. Other shape of reinforcer also have some process limitations such as complexity of utilizing them on process and lower level of reinforcing in compare with UD. Due to these infirmities, application of pultrusion products on special cases that profiles stands under transverse loads, encountered applied limitations. By preparing pultruded rod (E-glass / polyester) samples with different fiber angles and testing them with three point flexural test, observed with UD fiber angle increase toward pultruded rod direction, finally modulus and strength on transverse direction were increased
کلیدواژه ها:
The strength on transverse direction- unidirectional long fibers-pultruded rod- E-glass / polyester-composite
نویسندگان
babak jouyandeh
Polymer engineering department, Shiraz branch, Islamic Azad University, Shiraz, Fars, Iran
mohammad rahim vaseghi
Polymer engineering department, Shiraz branch, Islamic Azad University, Shiraz, Fars, Iran
amir hossein haghighi
Polymer engineering department, Shiraz branch, Islamic Azad University, Shiraz, Fars, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :