Friction Stir Processing (FSP) as a cladding method to produce AA2024-AA1050 multi-layer sheets
محل انتشار: دهمین همایش مشترک و پنجمین کنفرانس بین المللی انجمن مهندسی مواد و متالورژی و انجمن علمی ریخته گری ایران
سال انتشار: 1395
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 733
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IMES10_601
تاریخ نمایه سازی: 6 اردیبهشت 1396
چکیده مقاله:
Friction stir processing (FSP) was used for the fabrication of AA 2024- AA 1050 multi-layer sheets of 5×5 mm2 area. AA 1050 alloy was used as the substrate and AA 2024 of 2 mmthickness was cladded on the surface by thermo-mechanical effect of FSP. Crossover multi pass FSP with 50% of overlap was considered as the cladding method. Effect of number of passes onthe microstructure and hardness of clad layers was evaluated. Microstructural evolutions wereinvestigated by optical microscopy (OM) and scanning electron microscopy (SEM). The results showed that FSP can result in a defect free clad layer and a uniform metallurgical interface between the clad layer and base material. Moreover, clad layers exhibited higher hardness values in comparison to the base material
نویسندگان
Amin Jaferi
MSc Student, Characterization and Selection of Materials
Zohreh Sadeghian
Assistant Professor, Nanostructured and Advanced Materials
Behnam Lotfi
Associate Professor, Surface Engineering Department of Materials Science and Engineering, Faculty of Engineering, Shahid Chamran University of Ahvaz, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :