Evaluation of mechanical properties of Resistance Spot Welding and Friction Stir Spot Welding on Aluminium Alloys
محل انتشار: کنفرانس بین المللی پژوهش در علوم و مهندسی
سال انتشار: 1395
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 592
فایل این مقاله در 11 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICRSIE01_239
تاریخ نمایه سازی: 25 آذر 1395
چکیده مقاله:
Resistance Spot Welding and Friction Stir Spot Welding are two important and useful methods in automobile manufacturing industry and aerospace. In this study the effects of important parameters of both processes on joining strength of heat treatable and non-heat treatable aluminium alloys was investigated. In resistance spot welding method, the effects of welding current, welding time and electrode force on size of nugget and failure load and also, In friction stir spot welding method, the effects of parameters such as tool rotational speed and dwelling time on size of stir zone and failure load on aluminium alloys were investigated. In this study through the respective investigations it was proved that to obtain appropriate strength of spot welding, welding current in resistance spot welding method had similar behavior with tool rotational speed in friction stir spot welding.
کلیدواژه ها:
نویسندگان
Moeen Enami
School of Mechanical Engineering, College of Engineering, University of Tehran, Tehran, Iran.
Mohammadreza Farahani
School of Mechanical Engineering, College of Engineering, University of Tehran, Tehran, Iran.
Majid Sohrabian
Department of Aerospace Engineering, Iran University of Science and Technology, Tehran, Iran.
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :