Aerodynamic design and economical evaluation of site specific horizontal axis wind turbine (HAWT)
سال انتشار: 1393
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 693
فایل این مقاله در 14 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_EES-2-1_003
تاریخ نمایه سازی: 28 شهریور 1395
چکیده مقاله:
This paper presents the aerodynamic design and economical evaluation of a 200 kW site specific wind turbine for the province of Semnan in Iran. By designing site specific wind turbines, the cost of energy which is calculated out of the annual energy production and also the cost of manufacturing the rotor are minimized. The aerodynamic design is based on the well-known blade element momentum theory (BEM) which is integrated with annual wind distribution of the designated wind site to determine the net annual electricity yield for two designed rotors. In the first rotor, a linear fit approximation is used for the chord length and twist angle distributions for ease of manufacturing and to overcome technologicalbarriers in Iran. In the second rotor, the optimum original nonlinear distribution of the blade is assumed. The RISØ-A-24 aerofoil is used and optimized for the design tip speed ratio of λ=8.93 for both rotors. Pitch angle control is also adopted here. A comparison is made between the aerodynamic performance and decrease ofmanufacturing costs for both rotors. The economic feasibility indicates that based on current electricity costs of 12 cent per kWh in Iran for renewable energies, a profit of 7.2 cent and 8.1 cent per each kWh generated power is achievable respectively by the linear and nonlinear rotor designs. Therefore, the scenario ofreducing initial costs is not recommended unless technological shortcoming in manufacturing rotor cannot be avoided.
کلیدواژه ها:
Aerodynamic performance ، BEM theory ، Economical evaluation ، Horizontal axis wind turbine (HAWT) ، Site specific
نویسندگان
Ahmad Sedaghat
Department of Mechanical Engineering, Isfahan University of Technology, Isfahan 84156-83111, I.R. of Iran
Mojtaba Mirhosseini
Department of Mechanical Engineering, Isfahan University of Technology, Isfahan 84156-83111, I.R. of Iran
Mahdi Moghimi Zand
School of Mechanical Engineering,College of Engineering, University of Tehran, P.O.Box 11155-4563, Tehran, Iran