Viscosity of Anionic Bituminous Emulsions as a Function of Bituminous Percentage
محل انتشار: اولین همایش بین المللی قیر
سال انتشار: 1387
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,882
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
BITUMEN01_049
تاریخ نمایه سازی: 10 فروردین 1387
چکیده مقاله:
Application of bituminous as emulsions is so simple. It needs no heat, solvent and reagent. Only, it needs to add more water to adjust its parameters, like viscosity. In this research, the effects of different parameters have been studied on viscosity of five groups (MS-1, MS-2, MS-2h, SS-1, and SS-1h) of anionic bituminous emulsions (ASTM D977), and a simple nonlinear equation have been fitted to experimental viscosity data. The base of bituminous was Asmari Ahwaz Crude Oil. The anionic bituminous emulsions were produced by different mixture of sodium soap of Vinsol Resin, Arkopal N-60, Bentonite and tap water as oil in water emulsions. In this research, the effects of internal phase ratio, internal phase penetration, and the ratio of emulsifier have been studied on viscosity of emulsion.
کلیدواژه ها:
نویسندگان
Khashayar Badii
Environmental Department, Institute for Colorants, Paints, and Coatings (ICPC), Tehran, Iran.
Mohammad Haghighi
National Iranian Oil Production and Distribution Company, Tehran, Iran.
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :