Investigation in Soil Stabilization using a New Cement-Bitumen Emulsion - Case Study of Dugorun-Herat Project (Management and Quality Control)

سال انتشار: 1387
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,361

فایل این مقاله در 5 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

BITUMEN01_046

تاریخ نمایه سازی: 10 فروردین 1387

چکیده مقاله:

The use of an emulsion can enable a soil to oppose the action of capillary water, but it does not follow that the soil will remain stable when immersed in water. It has been found that when cement is used with emulsion there is an increase in the ability of the soil to remain unaffected when external water conditions are high. In addition to imparting strength to the soil the cement also assists the emulsion to break. Emulsion – cement- soil mixes are characterized by a certain amount of strength obtained from the cement while retaining the flexibility of a bitumen-bound mixture. In this research the construction process, experimental results and the management system of the Dugorun-Herat project is explained. The main characteristic of the soil stabilization method is using bitumen foam in traditional mixture. Controlling the quality of soil stabilization shows that this method is successful and has important advantages compare with the other methods. Details of this practical project are presented.

کلیدواژه ها:

نویسندگان

Ali Ghorbani

Payame Noor University (PNU)

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Selig, E. T., Waters, J. M., Track G eotechnology and ...
  • josteine, M., The Use of Cold Bitumen Stabilized Base Course ...
  • Marandi, S. M., Safapour, P., Base Course Modification through Stabilization ...
  • Ausrian ZTVT-STB 95, Additional Technical Requirements and Guidelines for Base ...
  • ASTM D 4123-82, Standard Method for Indirect Tension Test for ...
  • نمایش کامل مراجع