Mathematical Modeling of Plug flow and Axial Dispersion Models in a Sieve-plate Extraction Column

سال انتشار: 1395
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 578

فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

ICESCON03_261

تاریخ نمایه سازی: 16 شهریور 1395

چکیده مقاله:

Modeling of a counter-current Sieve-plate liquid–liquid extractor has been conducted using plug flow (PF) model and axial dispersion (AD) model. Several experiments were done using toluene/ acetic acid/ water system with acetic acid as mass transfer agent from aqueous to organic phase. New analytical solutions are proposed for two models respectively and the simulation results show a good agreement, compared with experimental data. In this paper, the solute concentration profiles in both disperse and continuous phases based on plug flow model as well as axial dispersion model and experimental values. The average deviation 12.47 and 7.26 percent between the experimental data and the simulation outcomes of the disperse and continuous phases composition in steady state condition were obtained for the models, respectively. Moreover, when the influence of dispersion in continues phase was included in the AD model, the simulation results greatly improved. Therefore, the results showed that the effect of dispersion in continuous phase can not be neglected in the mathematical modeling of these columns

نویسندگان

Pouria Amani

Department of Chemical Engineering, University of Tehran, Tehran, Iran

Mohammad Esmaeili

Department of Chemical Engineering, University of Tehran, Tehran, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Aufderheide, E., Vogelpohl, A., 1986. A convective model to interpret ...
  • Baird, M., 1974. Axial dispersion in a pulsed plate column. ...
  • Baird, M., Rao, N., Vijayan, S., 1992. Axial mixing and ...
  • Ettouney, R., El-Rifai, M., Ghallab, A., 2007. Steady state modeling ...
  • Hartland, S., Kumar, A., 1997. Design of Liquid-Liquid Extractors. Miner. ...
  • Jie, Y., Weiyang, F., 20). Hydrodyn amics and mass transfer ...
  • Li, N., Ziegler, E., 1967. Effect of axial mixing on ...
  • Morales, C., Elman, H., Perez, A., 2007. Modeling and simulation ...
  • Ruthven, D., 1983. The axial dispersed plug flow model for ...
  • Venkatanara saiah, D., Varma, Y., 1998. Dispersed phase holdup and ...
  • Weinstein, O., Semiat, R., Lewin, D., 1998. Modeling, simulation and ...
  • Yadav, R.L, Patwardhan, A.W., 2008. Design aSpects of pulsed sieve ...
  • نمایش کامل مراجع