Analytical Calculation of Frequency Response of YBCO Thin Film Bolometer
محل انتشار: شانزدهمین کنفرانس مهندسی برق ایران
سال انتشار: 1387
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,436
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICEE16_348
تاریخ نمایه سازی: 6 اسفند 1386
چکیده مقاله:
Here we present a new approach for analytical modelling and calculation of the response of superconductive transition edge bolometers in a wide range of modulation frequency and for different configuration of the film patterns. The method used here is based on solving the heat transfer differential equation for two different time varying heat sources related to the absorbed radiated power with considerations of two-dimensional boundary conditions for the case of meander line patterned devices. Method is developed to matches phase and magnitude of frequency response with measurements much better than previous approximation. Using this approach we have also investigated the effect of track width and spacing on the magnitude of bolometric response. The method is also capable of being used for analysis of other configurational parameters. In this calculation the effect of surface absorption caused by the thin film and absorber layer as well as bulk absorption in the depth of substrate is considered. Analytical results are presented and also compared with previous analytical work and the measured data.
کلیدواژه ها:
نویسندگان
Arash Pourhashemi
Sharif University
Alireza Kokabi
Sharif University
Ali Moftakharzadeh
Sharif University
Sina Khorasani
Sharif University
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :