Relationship between Mechanical Properties and Microstructure of Rigid Polyurethane Foams with Alternative Blowing Agents

سال انتشار: 1386
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,812

فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

ICHEC05_303

تاریخ نمایه سازی: 7 بهمن 1386

چکیده مقاله:

The mechanical response of rigid polyurethane foams to compression, creep and stress relaxation in the rise and transverse directions was examined experimentally with alternative blowing agents and was related to their microstructures. Compression in the rise direction yields a three-stage stress-strain response; an initial linear elastic response leading to yield, a protracted post-yield plateau (plastic phase) and a final sharp rise in compressive stress (densification phase). Compression in the transverse direction however, gives a monotonously increasing stress-strain curve. It shows that CFC-11 makes rigid polyurethane foam stronger in both direction than the HCFC-141b and cyclopentane. Creep tests show different behavior in the rise and transverse direction. Stress relaxation experiments indicate different relaxation times for rigid polyurethane foams which were blown with alternative blowing agent. Stress relaxation time increases with increasing of strain in both directions. Foams microstructure were observed by optical microscope and related to the mechanical properties.

نویسندگان

Esmaeilnezhad

Research Center for Polymeric Materials, Sahand University of Technology, Tabriz, IRAN

Rezaei

Research Center for Polymeric Materials, Sahand University of Technology, Tabriz, IRAN

Shakoori

Research Center for Polymeric Materials, Sahand University of Technology, Tabriz, IRAN

Khanzadeh

Donar Khazar Company, Tabriz, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • characteristics _ polyurethane foams incorporated Thermalء، [1] Sarier, N., Onder, ...
  • Jin, H., Lu, W., Scheffel, S., Hinnerichs, T. D., and ...
  • Malak, S. F. F., and Anderson, I. A., *Orthogonal cutting ...
  • Hatchett, D.W., Kodippili, G., Kinyanjui, J.M., Benicasa, F., Sapochak, L., ...
  • Tu, Z .H., Shim, V. P., and Lim, C.T., ،Plastic ...
  • Michel, F. S., Chazeau, L., Cavaille, J. Y., and Chabert, ...
  • نمایش کامل مراجع