Using Polyethylene Glycol (PEG) Solution for Drying Gelcast Ceramic Parts
محل انتشار: پنجمین کنگره بین المللی مهندسی شیمی
سال انتشار: 1386
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,678
فایل این مقاله در 5 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICHEC05_039
تاریخ نمایه سازی: 7 بهمن 1386
چکیده مقاله:
Removal of moisture is the longest stage in the gelcasting process due to the slow transport of liquid through the porous solid medium and can become troublesome in a manufacturing operation. In the pervious work of this group, gelcast green parts have been brought in contact with poly (ethylene glycol) with average molecular weight of 1000 as liquid desiccant with the purpose of withdrawing solvent in a reasonable period of time. Also the effects of factors such as solid loading, concentration of desiccant and type of solvent (aqueous or nonaqueous) on the drying rate were studied. In this paper, the effect of molecular weight of PEG on the drying rate of gelcast ceramic parts with different shape (cylinder, sphere) and various effective thicknesses was investigated. The results indicated that higher average molecular weight of PEG increased the drying rate.
کلیدواژه ها:
نویسندگان
Abolfazl Barati
Chemical Engineering Group, Faculty of Engineering, Arak University, I. R. Iran
Sedigheh Khaleghi
Chemical Engineering Group, Faculty of Engineering, Arak University, I. R. Iran
Meisam Ghareghani
Chemical Engineering Group, Faculty of Engineering, Arak University, I. R. Iran
Hamid Reza Norouzi
Chemical Engineering Group, Faculty of Engineering, Arak University, I. R. Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :