Laboratory Study of Determination of Optimum Amount of Water and Clay in Mortar Made with Lime and Fly Ash

سال انتشار: 1394
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 637

فایل این مقاله در 9 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

CRSTCONF01_246

تاریخ نمایه سازی: 27 اسفند 1394

چکیده مقاله:

To construct civil projects, engineers usually encounter problematic soils which make the construction and operation of structures difficult. One of such soils is clay which possesses a number of destructive features including great swelling capability. Lime is one of the oldest and most practical materials used to improve and stabilize such soils. The chemical reaction of lime and clay changes the structure of clay and reduces its destructive effects. In this research, with using uniaxial compression tests, the optimum amount of water and clay in mortar made with lime and fly ash were determined. The percentage of clay used in all of the cylindrical specimens was between 7 and 30%. The results show that the optimum amount of clay is equal to 20% of the whole coarse-grained soil, lime, and fly ash.

نویسندگان

Massoud Ameri

MSc Student of Geotechnical Engineering, Dept. of Civil Engineering, Hormozgan International Pardis University, Bandar Abbas, Iran

Behzad Kalantari

Assistant Professor of Geotechnical Engineering, Dept. of Civil Engineering, Hormozgan University, Bandar Abbas, Iran

Soheil Jahandari

MSc Graduate of Geotechnical Engineering, Graduate University of Advanced Technology, Dept. of Geotechnical Engineering, Kerman, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • AASHTO T 180, (2010), Standard method of test for moi ...
  • ASTM D 423-66, (1972), Standard method of test for liquid ...
  • ASTM D424-54, (1982), Standard method of test for plastic limit, ...
  • ASTM D 421-85, (2002), Standard practice for dry preparation of ...
  • ASTM D 422-63, (2002), Standard method for p article-analysis of ...
  • ASTM C 270-07, (2007), Standard specification for mortar for unit ...
  • ASTM D 5102-09, (2009), Standard test methods for unconfined compressive ...
  • ASTM D 854-10, (2010), Standard test methods for specific gravity ...
  • Cebeci, O., Al-Noury, S., and Mirza, W., (1989), Strength and ...
  • Consoli, N. C., da Silva Lopes Jr, L., Prietto, P. ...
  • Das, B. M., (1979), Introduction to soil mechanics, Iowa State ...
  • Malekpoor, M.R. and Toufigh, M.M., (2010), Laboratory study of soft ...
  • Osinubi, K. J. and Nwaiwu, C. M., (2006), Compaction delay ...
  • Reddy.R.N, (2010), Soil engineering test design and remediation, Chawla Offst ...
  • Stefanidou, M. and Papayianni, I., (2005), The role of aggregates ...
  • Terashi, M. and Juran, I., (2000), Ground improvement- State of ...
  • Toprak, G. and Boke, H., (2007), Characteristics of limes produced ...
  • نمایش کامل مراجع