Thermo-elasticity stresses analysis in thick-walled spherical FGM tanks by numerical and analytical methods
محل انتشار: همایش یافته های نوین در هوافضا و علوم وابسته
سال انتشار: 1394
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 703
فایل این مقاله در 13 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
MAARS01_464
تاریخ نمایه سازی: 16 اسفند 1394
چکیده مقاله:
The purpose of this paper is to study thermo-elasticity stresses in spherical FGM tanks by analytical and finite element methods and to compare the methods together. Alteration in the mechanical and thermal properties through the material thickness is assumed to be a linear function of the radius of the sphere. The materials are aluminum and alumina (Al2O3). Analytical method is based on direct solution of the Navier equation in spherical coordinates by considering the temperature effects. The finite element method used the commercial ABAQUS software and the two dimensional coupled stress-heat elements. Temperature distribution and displacement are calculated in the radial direction. To compare the methods, the radial, lateral and effective stresses distributions for two types of boundary conditions are studied. The results show that the accuracy of the analytical solution decreases with increasing temperature difference. Stresses distributions for four different tank materials are calculated and compared together.
کلیدواژه ها:
نویسندگان
M. Moslemi
Phd student, Department of Mechanical Engineering, Tabriz University, Tabriz, Iran
S. Moharrerzadeh Kurd
Phd student, Department of Mechanical Engineering, Tabriz University, Tabriz, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :