Assessment of nano-metal additives in turbulent flow on two different solid rocket motor configurations
محل انتشار: همایش یافته های نوین در هوافضا و علوم وابسته
سال انتشار: 1394
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 588
فایل این مقاله در 17 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
MAARS01_089
تاریخ نمایه سازی: 16 اسفند 1394
چکیده مقاله:
In this work a density-based numerical modeling for internal ballistic parameters of solid rocket motors is developed. The replacement of propellant surface is modeled by dynamic mesh method. The effect of addition of three different types of nano-metal additives is investigated while the erosion phenomenon is considered. These parameters are tested for a nozzle less and a rocket with convergent- divergent nozzle. The achieved results show that regression rate of propellant surface for a rocket with nozzle is more significant, also amongst the different turbulent models the k-w SST model is more compatible with the physical condition.
نویسندگان
M Kazemian
Master of Aerospace Engineering, Propulsion Trend, Mechanical Engineering Department Engineering Faculty, Ferdowsi University of Mashhad, Iran
M. H Djavareshkian
PhD of Aerospace Engineering, Associate Professor, Mechanical Engineering Department Engineering Faculty, Ferdowsi University of Mashhad, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :