Geometric Parameters Design of a Linear Switched Reluctance Motor and 3-D Finite Element (FE) Analysis

سال انتشار: 1394
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 564

فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

DCEAEM02_095

تاریخ نمایه سازی: 30 بهمن 1394

چکیده مقاله:

This paper presents the geometric parameters design of a 4-phases linear switched reluctance motor. The design methodology employed enabled a swift initial design of the lamination geometric parameters such as air-gap length, rotor pole arc length, stator pole arc length, number of winding turns per pole and the determination of the dc coil turns, maximum dc flux and minimum dc coil area. To evaluate the machine performance, the numerical technique has been utilized. In the numerical analysis, 3-D Finite Element (FE) analysis has been carried out using a MagNet CAD package (Infolytica Corporation Ltd.), for a Four-phase linear SR motor as a design example to support the efficacy of the proposed design procedure.

کلیدواژه ها:

LSRM ، 3-D Finite Element (FE) analysis

نویسندگان

H. Moradi CheshmehBeigi

Electrical Engineering Department, Faculty of Engineering, Razi University Kermanshah 67149, Iran