Comparision of HS and MC Constitutive Models in Sheet Piling Excavation Method in Dry Soil Layered Models (Dynamic Analysis)

سال انتشار: 1394
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 962

فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

SMFE02_002

تاریخ نمایه سازی: 27 بهمن 1394

چکیده مقاله:

In plastic models like Mohr-Coulomb (perfect plastic) yield surface is constant in stresses space. In contrast to these models, in hardening models, yield surface expands due to plastic straining. Hardening Soil model (HS) shows realistic and exactly assessment of soil actual behavior, so it should be considered in projects. In this paper sheet pile excavation is defined and Mohr-Coulomb and Hardening Soil models using finite element method are considered, separately. Acceleration spectrum of Manjil earthquack is used for dynamic analysis. The located soil in back of the wall is modeled in different layered models. Obtained results show increase 27.4, 72.2, 34.9 and 160.1 percent in the axial force, shear force, bending moment and horizontal displacement of sheet piles on the completion phase of excavation in Hardening Soil model, respectively. Also axial force of struts are increased. Results show that layering of soil in back of excavation support system has no effect on obtained results.

کلیدواژه ها:

Constitutive Model ، Mohr-Coulomb model ، Hardening Soil ، Sheet piles supporting system

نویسندگان

Masoud Amel Sakhi

Assistant Professor, Department of Civil Engineering, Qom University of Technology, Qom, Iran

Behrouz Ahmadpour

Master Student of Civil (Geotechnical) Engineering, Qom University of Technology, Qom, Iran

Mostafa Tavakoli

Master Student of Civil (Geotechnical) Engineering, Qom University of Technology, Qom, Iran