Processing of carbon nanotube reinforced Cu-Cr nanocomposite powder by mechanical milling
سال انتشار: 1393
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 306
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICNN05_624
تاریخ نمایه سازی: 30 آبان 1394
چکیده مقاله:
In this study Cu-Cr based nanocomposite containing carbon nanotubes (CNTs) were fabricated bymechanical alloying. Lattice parameter evolutions were evaluated by X-ray diffraction technique, and 40 hours millingtime was chosen as the best time for Cu-Cr solid solution formation. CNTs as the second reinforcement were milledwith Cu-Cr alloy up to 45 and 50 hours. Effect of CNTs on the microstructure of Cu-Cr was characterized by fieldemission scanning electron microscopy. It was found that the presence of carbon nanotubes was beneficial to decreaseof particle size. The average crystallite size of final nanocomposite was 40 nm.
کلیدواژه ها:
نویسندگان
M Masroor
School of Metallurgy and Materials Engineering, University of Tehran, Tehran, Iran
S Sheibani
School of Metallurgy and Materials Engineering, University of Tehran, Tehran, Iran
A Ataie
School of Metallurgy and Materials Engineering, University of Tehran, Tehran, Iran