An Investigation on the Mechanical Properties of Polylactic Acid/Thermoplastic Polyurethane

سال انتشار: 1393
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 786

فایل این مقاله در 5 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

ICHEC15_603

تاریخ نمایه سازی: 19 تیر 1394

چکیده مقاله:

Polylactic acid (PLA) is a biopolymer which is developed in the last century and has gained currency among many researchers and industries. Brittleness is considered as one of the most challengable drawbacks of PLA in its application. Thermoplastic polyurethane (TPU) has flexibility, so TPU is added into PLA matrix with the aim of coupling of PLA hardness with TPU flexibility.Melt blending is selected as an efficient method of blending for these materials. To prepare a biodegradable blend with PLA matrix and optimum properties, the blend should have PLA phase domination. Tensile, hardness and charpy impact tests were performed in order to investigate the amount of brittleness reduction. The lower hardness,higher elongation at break and impact strength at sufficient amounts of TPU sanctioned our belief in the toughening ability of TPU in PLA blend but insufficient amount of TPU in the blend caused some weaknesses and reduced the toughness of polymer blend.

نویسندگان

Erfan Oliaei

School of Chemical Engineering, College of Engineering, University of Tehran, P.O. Box ۱۱۳۶۵-۴۵۶۳, Tehran, Iran

Babak Kaffashi

School of Chemical Engineering, College of Engineering, University of Tehran, P.O. Box ۱۱۳۶۵-۴۵۶۳, Tehran, Iran

Seyed Mohammad Davachi

School of Chemical Engineering, College of Engineering, University of Tehran, P.O. Box ۱۱۳۶۵-۴۵۶۳, Tehran, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Han, Juan J., Huang, Han X., "Preparation and Cha racterization ...
  • Feng, Fei., Ye, Lin, "Morphologies and Mechanical Properties of Po ...
  • Hong, Hua., Wei, Jie., Yuan, Yuan., Chen, Fang P., Wang, ...
  • نمایش کامل مراجع