Secondary nucliation in semibatch emulsion polymerization: effect of secondary feed component on particle size and their distribution

سال انتشار: 1390
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 991

فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

ICHEC07_522

تاریخ نمایه سازی: 25 فروردین 1394

چکیده مقاله:

In this study, polymeric latexes with bimodal distribution in particle size were prepared by emulsion copolymerization. The effect of monomer and surfactant amounts in the secondary feed on primary and secondary particle sizes were investigated. The results showed that by control of monomer and surfactant amounts in the second step of polymerization and after formation of primary particles, it is possible to prepare bimodal latex particles with desired primary andsecondary particle sizes and their ratio as well. Primary particles were designed with core-shell structure for application in water base traffic coating and secondary particles had low Tg composition and molecular weight for decreasing minimum film formation temperature (MFFT) to formation of continuous film.

نویسندگان

Khadijeh Didehban

Polymer Science Department, Iran Polymer and Petrochemical Institute, P.O. Box: ۱۴۹۶۵/۱۱۵, Tehran, Iran

Iraj Hasanzadeh

Polymer Science Department, Iran Polymer and Petrochemical Institute, P.O. Box: ۱۴۹۶۵/۱۱۵, Tehran, Iran

Ali Reza Mahdavian

Polymer Science Department, Iran Polymer and Petrochemical Institute, P.O. Box: ۱۴۹۶۵/۱۱۵, Tehran, Iran

Amjad sazgar

Polymer Science Department, Iran Polymer and Petrochemical Institute, P.O. Box: ۱۴۹۶۵/۱۱۵, Tehran, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • O. Araujo, R. Giudici, E. Saldivar , W.H. Ray, Modeling ...
  • A.R. Hermes, A.C. Lavoie , D.C. Schall, Quick-drying aqueous coating ...
  • D.C. Schall , S.S. Edwards, Waterborne paints and method of ...
  • I.F.A. Mariz, J.R. Leiza , J.C. de la Cal, Competitive ...
  • M. Winnik , J. Feng, Latex blends An approach to ...
  • K. Tauer , I. Kiihn, Modeling particle formation in emulsion ...
  • E.M. Coen, S. Peach, B.R. Morrison , R.G. Gilbert, First-principles ...
  • W. Smulders , M.J. Monteiro, Seeded emulsion polymerization of block ...
  • S. Sajadi , B. Brooks, Unseeded semibatch emulsion polymerization of ...
  • J.M. Asua, Emulsion polymerization : From fundamental mechanisms to process ...
  • Z.W. Wicks, Organic coatings: science and technology, 2007. ...
  • N. Sheib at-Othman, S. Othman, O. Boyron , M. Alamir, ...
  • A. Echevarria, J.R. Leiza, J.C. De La Cal , J.M. ...
  • W. Jakubowski , J. Spanswick, Contro] over controlled radical polymerization ...
  • C.L. Zhao, Y. Wang, Z. Hruska , M.A. Winnik, Molecular ...
  • نمایش کامل مراجع