Manufacturing polyamide composite membranes via interfacial polymerization for air separation at low pressures
محل انتشار: یازدهمین کنگره ملی مهندسی شیمی ایران
سال انتشار: 1385
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,897
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
NICEC11_222
تاریخ نمایه سازی: 4 اردیبهشت 1386
چکیده مقاله:
At the first step of this study, asymmetric polyethersulfone (PES) membranes were produced via phase inversion process with different PES concentrations of 15, 18, 22, 25 wt% as the support for composite membranes. Afterwards a layer of polyamide glassy polymer was coated on the top of the support via interfacial polymerization between Diamine and Diacide solutions. The manufactured composite membranes were employed for separation of oxygen and nitrogen gases in a dead-end gas permeation module. This was carried out to evaluate the morphological alternation which is caused by monomer's concentration variation. Results depicted that composite PA membranes that is established on the
surface of a dense PES support have more selectivity compared to other composite membranes.
کلیدواژه ها:
gas separation - interfacial polymerization - solution diffusion mechanism
نویسندگان
Seyed Siavash Madaeni
Department of Chemical Engineering, Razi University, Kermanshah, Iran
Majid Esmaeili
Department of Chemical Engineering, Razi University, Kermanshah, Iran
Barzin
Iran Polymer and Petrochemical Institute
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :