CFD Simulation of Bubble Column Reactor Hydrodynamics

سال انتشار: 1383
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,164

فایل این مقاله در 9 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

NICEC09_516

تاریخ نمایه سازی: 14 فروردین 1386

چکیده مقاله:

A bubble column reactor is a multiphase flow reactor in which reactant gas is bubbled through a liquid solution. Bubble column reactors may be operated in a batch or continuous mode. They are known as excellent reactors for processes, which require large interfacial area for gas-liquid mass transfer and efficient mixing for reacting species for example in bubble column fermentors. A better knowledge of the local hydrodynamics to increases the predictability of the reactor design and to improve the efficiency of the processes appears currently necessary. The use of numerical modeling i.e. computational fluid dynamics (CFD) should be able to improve this knowledge by providing a complete description of the local hydrodynamics if an adequate model is used. In this research, hydrodynamic behavior of bubble column reactor was determined. In previous works, the prediction of gas holdup is not accurately covered. For that reason, the turbulency in liquid phase is modeled by standard k-ε model. In addition, local axial velocity, velocity distribution and local gas hold-up were calculated by fluent 6.0.3, which is commercial software. The results have been compared with experimental data, which shows a quite good agreement

نویسندگان

Rahimi

Department of Chemical Engineering, Sistan and Baluchestan University

Zivdar

Department of Chemical Engineering, Sistan and Baluchestan University

Salehi

Department of Chemical Engineering, Sistan and Baluchestan University

Nandakumar

Department of Chemical and Material Engineering, University of Alberta, Edmonton